Support

VELLO bikes are suitable for riders of almost any height, from 150cm to 210cm. For tall people over 185cm tall we recommend the optional 600mm seat post (instead of the 500mm seat post) and longer stem. In the end it is not the height but the stride length that counts, which is why we recommend a test ride and individual adjustment. For customers who prefer a more upright seating position we recommend the longer stem.

VELLO bikes are delivered from the factory with Schwalbe Marathon 1.5 or Kojak 1.35 tyres (both E.T.R.T.O. 406). Tires up to 2.10 width, such as Crazy Bob or Big Apple can be mounted. Note: VELLO Bike frames also allow the installation of wheels for those who have an E.T.R.T.O. diameter of 451 (larger 20 inches).

When folded, the VELLO Bike measures H 57cm x L 79cm x W 29cm and is roughly the size of a large suitcase. As a piece of luggage, it can therefore be taken along effortlessly and without any problems in local and long-distance public transport (train, tram, underground, S-Bahn, ICE, bus, plane*, ...). A transport bag is not necessary. However, we do offer a suitable transport bag for transporting the VELLO bike in our accessories range.

All non-electric models can be taken on board without any problems. If you want to take the VELLO Bike+ (e-bike) on board an airplane, we recommend that you contact your airline in advance, as the regulations for taking e-bikes on board vary greatly. Some airlines allow the removed rear wheel to be carried in hand luggage, as the battery capacity does not exceed 160Wh. The regulations are not uniform and therefore we recommend in any case that you check the respective regulations carefully before taking the VELLO Bike+ on an air trip.

Chromoly or aluminium? When we developed the VELLO Bike, we were looking for a perfect balance between low weight, high stability, long durability and high riding comfort. We were able to combine these characteristics in an ideal balance by using the most modern chrome-molybdenum steel. The excellent damping characteristics and the simultaneously high stiffness of Chromoly make (in contrast to aluminium frames) heavy suspension components superfluous. The particularly thin-walled, double-butted frame tubes result in additional weight savings.

The VELLO Bike+ has a powerful 250 Watt motor and a 173Wh battery.A big difference between conventional e-bikes and the VELLO Bike+ is the 4 sensors which, in cooperation with the intelligent motor management, enable efficient self-charging. This is 2 sensors more than with all previously known e-bike systems. One of these sensors measures the inclination and detects even the slightest slope or gradient to start the energy recovery or to activate the motor support. Another sensor activates the energy recovery when pedalling backwards on the VELLO Bike+. This supports the braking effect and feeds most of the energy into the system. An additional sensor measures acceleration forces and can thus activate energy recovery every time you brake. A sensor for detecting the applied torque is also installed, e.g. to generate energy for charging the battery in case of tailwind.

Elegantly concealed in the rear axle is a charging socket that allows the batteries to be charged at the power outlet. The charger is a compact and lightweight power supply unit (as we know it from notebooks, for example) with which the batteries of the VELLO Bike+ can be charged from 0% to 100% in 3 hours. The rear wheel hub combines battery, control unit and motor. This means that the battery and drive integrate seamlessly into the bike.

The motor management of the VELLO Bike+ has 6 driving modes:

Turbo mode: Offers more support than a conventional e-bike with full 250 watts and a range up to 50km.

E-Bike mode: Offers support like a conventional pedelec with a range up to 75km.

Eco mode: Additional 3 levels with 110 - 180km range.

Bike+ (Theoretical self-charging): The own pedal power (50-60Watt) is doubled by the hybrid system from the motor. During a tour-return (with ascents and descents) the battery charge is increased by the intelligent energy recovery.

Basically, the VELLO Bike+ does not need a gear shift from 0-25 km/h, as the motor takes over this function. Even gradients of up to 8% (very rare in urban areas) can be mastered effortlessly. We also offer a 2-speed gear system so that the VELLO Bike+ can be mechanically driven at over 25 km/h with a comfortable cadence (Schlumpf Speed ​​Drive) or to effortlessly master gradients of up to 17% (Schlumpf Mountain Drive). This is an ultra-flat 2-speed planetary gear with a gear ratio of 1:1.65 for the Schlumpf Speed ​​Drive or with a reduction of 2.5:1 for the Schlumpf Mountain Drive, which is attached to the bottom bracket. The VELLO Bike+ is a pedelec. This means that the motor support starts as soon as you start pedaling and ends when you stop pedaling.

For the initial setup of the VELLO Bike+ and for choosing the driving modes, a connection between smartphone/tablet and the VELLO Bike+ via bluetooth is required. The system will save the chosen settings and can then be operated without Bluetooth-connection. To start the system, the cyclist then has to accelerate to about 10km/h and pedal backwards 3 times. When not ridden, the VELLO Bike+ will stay activated for 5 minutes and will then shut down automatically. The connection between smartphone/tablet and the VELLO Bike+ is therefore only needed for the initial setup and changing the driving modes, activating the electrical engine and tracking the route.

The ZEHUS app is compatible with Android version 7.0 or higher and Apple iOS 14 or any newer version.

A front rack is available. The front rack is easily mounted with a quick-mount mechanism. Our separately available VELLO daypack should suit most needs. The front rack is removable and won't get in the way when the bike is folded, plus it will also not interfere with the steering. For heavier luggage and panniers, we recommend to equip the VELLO bike with the rear rack that can carry loads of up to 25kg.

VELLO bikes have a 5 year warranty on the frame and fork. The motor of the VELLO Bike+ has a 2 year warranty and the battery 1 year (or 1.000 charging cycles).

The VELLO bike can be maintained and repaired by any VELLO retailer or qualified specialist workshop. The replacement of the battery of the VELLO Bike+ must be carried out by an authorized VELLO retailer to obtain warranty.

The VELLO Bike+ is equipped with state-of-the-art Li-ion batteries (29,6V, 173Wh). When it needs to be replaced, then it should be carried out by an authorized VELLO retailer in order for it to be within the terms of the warranty. The replacement of the battery of the VELLO Bike+ must be carried out by any authorized VELLO retailer.

In the unlikely scenario that you experience problems with the 3in1 drive, then please get in touch with your VELLO retailer. The VELLO team also stands at your disposal.

The first step is to fill out the return form (here) and then send it to VELLO GmbH via support (support@vello.bike). You will then be contacted by one of our employees. Depending on the warranty case, shipping must be organized by the customer or VELLO GmbH. Shipping address is: VELLO GmbH: 1120 Vienna, Schönbrunner Straße 213-215/HOFGB/HI TR